![]() it's a known problem for the LG panel, but not serious one. has a slight ghosting issue and a small bump in the corner. Retina Macbook Pro mid-2012 512GB SSD, Core i7, 16GB ram. PS4 500GB 1 controller with Until Dawn game - $200īose QC35 in excellent condition, no wear - $250 Similar to … 00F0DD0I6/ but with ADSL/VDSL, it usually costs around $200+ Netgear Nighthawk AC1900 ADSL/VDSL, excellent condition - $130 Kindle Paperwhite excellent condition (not waterproof) - $80īlue Yeti Mic Black color, barely used - $100 The phone is in a perfect condition, no scratches on the screen or back except on the front speaker, comes with 3 cases and a whitedome screen protector. one for work and a Dell one that works on computers that supposedly only support Vista and an upgrade version that has worked on a few computers.Logitech G710+ Mechanical Gaming Keyboard with Tactile High-Speed Keys (Brown Switches) - $50 How can I format the drive if I can not get XP to see it? I have tried other XP cd’s, I have my corp. It comes with two floppies one for the blue connectors and one for the black. The floppies do contain the files needed I checked them on a second computer. It will go out after I hit cancel or exit. The thing I do not understand is why the floppy light stays on after hitting F6 to load third party drivers. And both are seen by the BIOS, I disconnected the second SATA drive so there would be only one drive to be used at first. ![]() The DVD/ZIP drives are both set on an IDE cable. I have tried each of the settings like (Raid, AHCI and IDE) I did try the F9 set to default. ![]() The cable only connects one way, there is a notch one each side of the cable. I tried a known good floppy drive and then a good cable. Tried doing, I did most of what you replied with. I have used every thing on the MB we site and can not get to the drives even though the BIOS can see them. I tried booting in to the RAID section and selecting RAID, I just used one drive and using known good SATA cables. I have tried the F6 to load drivers I used both the blue cable and the black drivers. I checked the floppy disk on another computer and worked great, I used a known good floppy drive with the same results, I used another known good floppy drive cable. The provided Floppies did not work the floppy drive light was on after I hit F6 but not before. I booted to the XP Pro CD and no HD found, fine since it has SATA drives I will load the drivers with F6 at boot. The floppy drive light stayed on after I hit the F6 key. No problems with anything, BIOS found all drives and the other drives. I will post more if needed, install went great. Two used SATA 2/80 gig drives, a used DVD R/W drive, a used IDE zip drive, a floppy drive and a new P/S 800WT. It is a new MB, new Corsair memory (2 1gig DDR2), an Intel quad core CPU and fan. I have made a few computers in my time but this MB is a real pain in the rump! I have been given the task of installing a configuring this main board.
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |